Welders need to protect themselves from splattering metals and fire burns. The welding jackets they wear must be fire-resistant and thermally insulating. The jackets should also not constrict the welder. It should be as comfortable as possible.
Striking the right balance between comfort and utility is a difficult task. Especially when it comes to purchasing personal protective equipment or PPE.
In this article, we list out the best welding jackets available in the market.
This welding jacket strikes the perfect chord between affordability and utility. The jacket comes in navy color. It has high collars to protect the neck. The snug fit wrists provide no allowance for splatters to get to the skin. It has one pocket on the inside to keep the necessary tools handy. The jacket is made of 88 percent cotton and 12% nylon. Nylon makes it a bit more expendable than the usual varieties. The jacket weighs around 1.3 pounds and is 30 inches long. Go for this jacket if you are looking for something that’s reasonably priced and does not compromise with your safety.
- High protection around the neck and wrists.
- Extremely affordable
- No pockets on the outside
This jacket comes in various sizes. Starting from small to 4X large. The shoulders are satin-lined and the collars have two-snap options. The design of the shoulder makes it easy to wear and take off the jacket. The collars protect the neck from splatters and fire sparks getting to the skin. The underarms are gusseted. This helps to move arms freely. To keep the necessary welding gears, there are pockets on the inside. There is also a pocket on the left sleeve. The price of the jacket is on the higher side. But, it is a great option for frequent welders. It does not war-off easily. Diverse options in sizes make it comfortable to wear for all choices of fit. If classy jackets with a long shelf-life are your thing, go for this jacket.
- Pocket on the left sleeve as well as on the inside
- Available in at least seven size-varieties
- Adjustable waist snaps.
- Cuffs are not snug-fit.
- No pockets on the outside.
These cool welding jackets from Lincoln Electric are worth the money. Not only the sleeves, but the entire frontal area of the jacket is also made of leather. The sleeves are ergonomically designed. The back of the jacket is made of cotton. The cotton used in this jacket protects from the flame and keeps the airflow consistent. The gaps between the buttons are often a weak spot for welding jackets. Fire sparks get to the skin through these gaps. This welding jacket has a three-layered button liner. It uses leather, fabric, and velcro to protect the skin without compromising with the fit. There is one pocket on the inside for tools and gears. The cuffs are snug-fit and the leather collar saves from the sparks. This is a fully professional jacket. Opt for this option if welding is your daily job.
- The cuffs have chrome-plated metal snaps.
- Two-parts armpit design provides better arm movement.
- Large pocket on the inside.
- Pricey option for infrequent welders
- No pockets on the inside.
This is a heavy-duty leather jacket at a reasonable price. It uses the thicker variety of split leather. The jacket comes in brown color and weighs almost a pound. The stitching is robust. It helps the jacket to remain safe from wear and tear. The jacket uses reinforced snaps. The thorough use of leather in these jackets makes it heat-resistant. The jacket is available in both large and extra-large fits.
Go for this jacket if you need heavy-duty at a cheaper rate.
- Made of thick leather of premium quality
- A high collar provides protection around the neck.
- Soapstone-sized pockets on both the sleeves.
- Sleeves are big in size and not snug-fit.
These jackets are available for all choices of fit. From small to 3X large. These yellow-colored twill jackets are permanently flame-resistant. They also protect from cuts. It is tested at cut resistant level 2 as standardized in the ANSI system. The product aims at providing comfort even in the most extreme conditions. These custom welding jackets are also available with 18 inches sleeves. The standard length is 30 inches. If you are looking for options that are efficient and sturdy, go for these Tillman jackets.
- Provides protection from cuts and rough, edgy surfaces.
- Light and comfortable
- Not suitable for frequent heavy-duty use.
- Not enough protection around the neck
These jackets come in the color brown. These are made of premium quality split leather. The leather gets supervised extra tanning to make it heat-resistant. Although made of split cowhide leather, the jacket is soft and comfortable to wear. There is one big pocket on the outside of the jacket. There are two small pockets, soapstone-sized, on the outer sleeves. Adjustable wrist-snaps and underarm gussets make the jacket flexible and easy to wear.
- Three pockets in total.
- Sewn to provide heat-resistance and durability with double lock-stitched seams.
- Premium quality under 100 dollars.
- No pockets on the inside.
- No special protection for necks.
Welding jackets are widely available these days on most of the e-commerce platforms. Amazon. Lowe’s, Walmarts sell these products at reasonable discounts. Used welding jackets are sold on eBay quite frequently as well. Conditions in summer also call for specially made summer welding jackets.
Although people often go for cheap welding jackets, its always better to go for heavy-duty durable ones. Cheap welding jackets often compromise with protection around the neck and the wrists. One should be extra-cautious around these areas.
The final selection should be made on two parameters: the frequency of use and comfort. If used frequently, the material should be tough and wear-resistant. However, tough material should not be the reason for discomfort. It should allow moving hands freely and should not be too hot on the inside.